Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 2984

cli> show ethoam two-way-delay domain MD association MA endpoint 10 remote-mep 0
Legend: Jitter: - = undefined value
: RMEP-ID: 0 = two-way-delay was initiated with target mac-address
Remote Mac address
-------------------+--------+--------------+------------
00:d0:95:ef:66:88
00:d0:95:ef:88:88
cli> show ethoam two-way-delay domain MD association MA endpoint 10 remote-mep 15
Legend: Jitter: - = undefined value
: RMEP-ID: 0 = two-way-delay was initiated with target mac-address
Remote Mac address
-------------------+--------+--------------+------------
00:d0:95:ef:66:55
cli> show ethoam two-way-delay domain MD association MA endpoint 10
Legend: Jitter: - = undefined value
: RMEP-ID: 0 = two-way-delay was initiated with target mac-address
Remote Mac address
-------------------+--------+--------------+------------
00:d0:95:ef:44:44
00:d0:95:ef:66:88
00:d0:95:ef:88:88
00:d0:95:ef:66:55
output definitions
Remote Mac address
RMEP-ID
Delay
Jitter
Release History
Release 6.4.3; command was introduced.
Related Commands
ethoam two-way-delay
MIB Objects
dot1agCfmMdTable
dot1agCfmMdName
dot1agCfmMaNetTable
dot1agCfmMaNetName
dot1agCfmMepTable
dot1agCfmMepIdentifier
page 45-80
RMEP-ID Delay (us)
0 5896 282
0 2584 1856
RMEP-ID Delay (us)
15 2736
RMEP-ID Delay (us)
12 2369 1258
0 5896 282
0 2584 1856
15 2736
Remote MAC address.
Value of RMEP-ID
Physical slot and port number.
Type of an error.
Initiate two-way-delay messages from a particular MEP to an
RMEP using target-endpoint or target-MAC address.
Jitter (us)
Jitter (us)
-
Jitter (us)
-
OmniSwitch CLI Reference Guide
Ethernet OAM Commands
June 2012