Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 2742

output definitions (continued)
authent
enabled
restore
ignore BPDU
Release History
Release 6.1; command was introduced.
Related Commands
show vlan port
page 37-40
The authentication status for the port (on-avlan, on-8021x, or off). Use
the vlan port authenticate
this status.
The default VLAN status for the port: on enables the forwarding of
traffic that doesn't match any rules on the port's configured default
VLAN; off disables the forwarding of such traffic and packets are dis-
carded. Use the vlan port default vlan
The default VLAN restore status for the port: on indicates that the
mobile port will not retain its VLAN assignments when qualifying traf-
fic ages out on that port; off indicates that the mobile port will retain its
dynamic VLAN assignments after qualifying traffic has aged out. Use
the vlan port default vlan restore
The ignore BPDU status for the port: on indicates that if the mobile
port receives BPDUs, they're ignored and the port remains eligible for
dynamic VLAN assignment; off indicates that if a BPDU is seen on the
port, mobility is disabled and the port is not eligible for dynamic
assignment. The status of ignore BPDU is set when the
mobile command is used to enable or disable mobility on a port.
Displays VLAN port assignments for all VLANs, a specific VLAN,
or for a specific port.
Port Mobility Commands
and vlan port 802.1x commands to change
to change this status.
command to change this status.
OmniSwitch CLI Reference Guide
vlan port
June 2012