Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 3237

Virtual Private LAN Service (VPLS) Commands
•
Specify an existing VPLS service ID number and the associated access port for this SAP.
•
Printable, 7-bit ASCII characters are also allowed in the description text string.
Examples
-> configure service vpls 10 sap 1/2:10 description "CE1 to VPLS1 SAP"
-> configure service vpls 13 linkagg 20 description "CE2 to VPLS2 SAP"
-> configure service vpls 10 sap 1/2:10 no description
-> configure service vpls 13 linkagg 20 no description
Release History
Release 6.4.2; command was introduced.
Related Commands
configure service vpls sap create
configure service vpls sap trusted
configure service vpls sap shutdown
configure service vpls sap static-mac
show service id sap
show service sap-using
MIB Objects
sapBaseInfoTable
sapPortId
sapEncapValue
sapDescription
svcBaseInfoTable
svcId
OmniSwitch CLI Reference Guide
Configures a SAP by associating a SAP ID with a Virtual Private
LAN Service (VPLS).
Configures the trust mode for the specified SAP ID.
Configures the administrative status for the specified SAP ID.
Configures a static MAC address entry in the forwarding data-
base for the service that is associated with the specified SAP ID.
Displays configuration information about the Service Access
Points (SAPs) associated with the specified service.
Displays the SAP configuration for the local router.
June 2012 page 50-63