Show Efm-Oam Port Statistics - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show efm-oam port statistics

Displays the LINK OAM statistics on a port, or a range of ports or on all ports.
show efm-oam port slot/port[-port2] statistics
show efm-oam port statistics
Syntax Definitions
slot/port
-port2
Defaults
By default, the statistics of all ports are displayed.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855.
Usage Guidelines
Use the port parameter to display the statistics of a specific port.
Examples
-> show efm-oam port 1/1 statistics
Port 1/1:
Information OAMPDU Tx
Information OAMPDU Rx
Unique Event Notification OAMPDU Tx
Unique Event Notification OAMPDU Rx
Duplicate Event Notification OAMPDU TX : 0,
Duplicate Event Notification OAMPDU Rx : 0,
Loopback Control OAMPDU Tx
Loopback Control OAMPDU Rx
Unsupported OAMPDU Tx
Unsupported OAMPDU Rx
Frames Lost due to OAM
-> show efm-oam port 1/1-4 statistics
Port 1/1:
Information OAMPDU Tx
Information OAMPDU Rx
Unique Event Notification OAMPDU Tx
Unique Event Notification OAMPDU Rx
Duplicate Event Notification OAMPDU TX : 0,
Duplicate Event Notification OAMPDU Rx : 0,
Loopback Control OAMPDU Tx
Loopback Control OAMPDU Rx
Unsupported OAMPDU Tx
page 46-34
Specifies the slot number for the module and the physical port number
on that module (e.g. 3/1 specifies port 1 on slot 3).
The last port number in a range of ports that you want to configure on
the same slot (e.g. 3/1-4 specifies ports 1,2,3, and 4 on slot 3).
: 1035,
: 988,
: 0,
: 0,
: 1,
: 0,
: 0,
: 0,
: 0
: 1035,
: 988,
: 0,
: 0,
: 1,
: 0,
: 0,
LINK OAM Commands
OmniSwitch CLI Reference Guide June 2012