Setting The Cli Language Mode; Returning From Current View To Lower Level View; Returning From Current View To User View - H3C S7500 Series Operation Manual

Operation Manual – System Maintenance and Debugging
H3C S7500 Series Ethernet Switches
To do...
Set the name and
time range of the
daylight saving
time

2.1.7 Setting the CLI Language Mode

To do...
Set the CLI
language mode

2.1.8 Returning from Current View to Lower Level View

Return from current
view to lower level view

2.1.9 Returning from Current View to User View

To do...
Return from current
view to user view
clock summer-time zone-name one-off
start-time start-date end-time end-date
offset-time
clock summer-time zone-name
repeating { start-time start-date end-time
end-date | start-time start-year
start-month start-week start-day
end-time end-year end-month end-week
end-day } offset-time
Use the command...
language-mode
{ chinese | english }
To do... Use the command...
quit
Use the command...
return
Chapter 2 Basic System Configuration and
Use the command...
Optional
By default, the command line
interface (CLI) language mode is
English.
2-3
Remarks
Optional
Available in user
view
Remarks
Remarks
This operation will result in
exiting the system if current
view is user view.
Remarks
The composite key <Ctrl+Z>
has the same effect with the
return command.
Debugging