Idle-Timeout - H3C s3100 series Command Manual

undo history-command max-size
View
User interface view
Parameters
value: Size of the history command buffer, ranging from 0 to 256 (in terms of commands).
Description
Use the history-command max-size command to set the size of the history command buffer.
Use the undo history-command max-size command to revert to the default history command buffer
size.
By default, the history command buffer can contain up to ten commands.
Related commands: display history-command.
Examples
# Set the size of the history command buffer of AUX 0 to 20 to enable it to store up to 20 commands.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] user-interface aux 0
[Sysname-ui-aux0] history-command max-size 20

idle-timeout

Syntax
idle-timeout minutes [ seconds ]
undo idle-timeout
View
User interface view
Parameters
minutes: Number of minutes. This argument ranges from 0 to 35,791.
seconds: Number of seconds. This argument ranges from 0 to 59.
Description
Use the idle-timeout command to set the timeout time. The connection to a user interface is terminated
if no operation is performed in the user interface within the timeout time.
Use the undo idle-timeout command to revert to the default timeout time.
You can use the idle-timeout 0 command to disable the timeout function.
The default timeout time is 10 minutes.
Examples
# Set the timeout time of AUX 0 to 1 minute.
<Sysname> system-view
1-12