Show Fan - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show fan

Displays the current operating status of chassis fans.
show fan [number]
Syntax Definitions
number
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 9000E
Usage Guidelines
•
On chassis-based switches if no fan number is specified the status of all fans is displayed.
•
On stackable switches if no switch number is specified the status of all fans for all switches is
displayed.
Examples
-> show fan
Chassis Fan Status
-------+---+-----------
1 1 Running
1 2 Running
1 3 Running
2 1 Running
2 2 Running
2 3 Running
output definitions
Chassis
Fan
Status
Release History
Release 6.1; command was introduced.
page 54-50
Specifies the switch (slot) number of the chassis for stackable switches
or a fan number for chassis-based switches.
The number of the switch in a stack.
The fan number describing the fan position.
The current operational status of the corresponding fan.
Chassis Management and Monitoring Commands
OmniSwitch CLI Reference Guide June 2012