Show Temperature - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show temperature

Displays the current operating chassis ambient temperature, as well as current temperature threshold
settings.
show temperature [number]
Syntax Definitions
number
Defaults
If a slot number is not specified with this command on an OmniSwitch stackable switch, temperature
information for all switches operating in the stack is displayed by default.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E.
Usage Guidelines
The number parameter is not an option when using this command on a single-chassis, standalone switch,
such as the OmniSwitch 9000E.
Examples
-> show temperature
Temperature for chassis 1
Hardware Board Temperature (deg C)
Temperature Upper Threshold Range (deg C)
Temperature Upper Threshold (deg C)
Temperature Status
Temperature Danger Threshold (deg C)
Temperature for chassis 2
Hardware Board Temperature (deg C)
Temperature Upper Threshold Range (deg C)
Temperature Upper Threshold (deg C)
Temperature Status
Temperature Danger Threshold (deg C)
Temperature for chassis 3
Hardware Board Temperature (deg C)
Temperature Upper Threshold Range (deg C)
Temperature Upper Threshold (deg C)
Temperature Status
Temperature Danger Threshold (deg C)
page 54-52
Specifies the slot (i.e., switch) number within the stack. The valid range
of slot numbers is 1–8, depending on the size of the stack.
Chassis Management and Monitoring Commands
= 41,
= 15 to 80,
= 57,
= UNDER THRESHOLD,
= 80
= 40,
= 15 to 80,
= 57,
= UNDER THRESHOLD,
= 80
= 40,
= 15 to 80,
= 57,
= UNDER THRESHOLD,
= 80
OmniSwitch CLI Reference Guide June 2012