Mac-Retention Dup-Mac-Trap - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Chassis MAC Server (CMS) Commands

mac-retention dup-mac-trap

Enables or disables the duplicate MAC address trap status.
mac-retention dup-mac-trap {enable | disable}
Syntax Definitions
enable
disable
Defaults
Parameter
enable | disable
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855-U24X
Usage Guidelines
If the old primary switch is not detected and included in the stack within a pre-defined time period, an
SNMP trap will be generated.
Examples
-> mac-retention dup-mac-trap enable
Release History
Release 6.2.1; command was introduced.
Related Commands
show mac-retention status
MIB Objects
chasMacAddrRetentionObjects
chasPossibleDuplicateMacTrapStatus
OmniSwitch CLI Reference Guide
Enables the duplicate MAC address trap status.
Disables the duplicate MAC address trap status.
Status
disable
Displays the MAC retention status.
June 2012 page 55-5