Show Hash-Control - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Chassis Management and Monitoring Commands

show hash-control

Displays the current hash control settings for the switch.
show hash-control [non-ucast]
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
N/A
Examples
-> show hash-control
Hash Mode = brief,
Udp-Tcp-Port = disabled
-> show hash-control non-ucast
Non-ucast Hash Status = Enabled,
output definitions
Hash Mode
Udp-Tcp-Port
Non-ucast Hash Status
Release History
Release 6.4.2; command was introduced.
Release 6.4.3; non-ucast parameter was added.
Related Commands
hash-control
MIB Objects
alaChasHashMode
alaChasUdpTcpPortMode
alachasNonUCHashControl
OmniSwitch CLI Reference Guide
The current hash mode.
Status of UDP/TCP hashing.
Status of Non-ucast hash status.
Configures the hash mode of the switch..
June 2012 page 54-61