Table 19: Mac Match Ethernet Frame Types; Table 20: Mac Match Criteria Frame Type Dependencies; Table 21: Default Service Ingress Policy Id 1 Definition - Alcatel-Lucent 7210 SAS-R6 OS Quality Of Service Manual

QoS Overview

Table 19: MAC Match Ethernet Frame Types

Frame Format
802.3
Ethernet-II
Table 20

Table 20: MAC Match Criteria Frame Type Dependencies

Frame Format
802.3
ethernet-II
Service ingress QoS policy ID 1 is reserved for the default service ingress policy. The default
policy cannot be deleted or changed.
The default service ingress policy is implicitly applied to all SAPs which do not explicitly have
another service ingress policy assigned. In the default policy no queues are defined. All traffic is
mapped to the default forwarding class which uses a meter by default. The characteristics of the
default policy are listed in

Table 21: Default Service Ingress Policy ID 1 Definition

Characteristic
Meter 1
Page 48 7210 SAS-X and 7210 SAS-R6 OS Quality of Service Guide
IEEE 802.3 Ethernet frame. Only the source MAC, destination MAC and
IEEE 802.1p value are compared for match criteria.
Ethernet type II frame where the 802.3 length field is used as an Ethernet
type (Etype) value. Etype values are two byte values greater than 0x5FF
(1535 decimal).
lists the criteria that can be matched for the various MAC frame types.
Source MAC
Yes
Yes
Table
Item
1 (one) all unicast traffic:
• Forward Class: best-effort (be)
• CIR = 0
• PIR = max (4000000 kbps in case of a LAG with four member
ports)
• MBS, CBS = default (values derived from applicable policy)
Description
Dest MAC
Yes
Yes
21.
IEEE 802.1p Value
Yes
Yes
Definition
Etype Value
No
Yes