Ethoam Domain - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

Ethernet OAM Commands

ethoam domain

Creates an Ethernet domain with a specific name.
ethoam domain {domain_name | mac_address} format {dnsname | mac-address-uint | string}
level level_num
no ethoam domain {domain_name | mac_address}
Syntax Definitions
domain_name
mac_address
dnsname
mac-address-uint
string
level_num
Defaults
N/A
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
•
Use the no form of this command to remove the Ethernet domain.
•
This command allows the service provider to create an Ethernet OAM domain on the bridge.
•
The domain_name should be unique amid all those used by or available to the service provider.
•
The level must be 0-2 at operator level, 3-5 at provider level and 6-7 at customer level when creating
the level of domain.
Examples
-> ethoam domain esd.alcatel-lucent.com format dnsname level 5
-> no ethoam domain esd.alcatel-lucent.com
Release History
Release 6.6.1; command was introduced.
OmniSwitch 6250 CLI Reference Guide
Domain name of the Ethernet domain. The length of the domain name
varies depending on its format.
Specifies the CFM system MAC address.
Domain name is in the Domain Name Service (DNS) format. Up to 255
characters may be used.
Domain name is in the MAC address format.
Specifies the domain name as a string. Up to 43 characters may be used.
Level of the Maintenance Domain (MD). The valid range is 0–7.
November 2009 page 25-3