Display Dhcp Server Ip-In-Use - H3C S7500E Series Command Manual

Command Manual – DHCP
H3C S7500E Series Ethernet Switches
Parameters
None
Description
Use the display dhcp server forbidden-ip command to display IP addresses
excluded from dynamic allocation in DHCP address pool.
Examples
# Display IP addresses excluded from dynamic allocation in the DHCP address pool.
<Sysname> display dhcp server forbidden-ip
IP Range from 1.1.1.1
IP Range from 2.2.2.2

1.1.15 display dhcp server ip-in-use

Syntax
display dhcp server ip-in-use { all | ip ip-address | pool [ pool-name ] }
View
Any view
Parameters
all: Displays the binding information of all DHCP address pools.
ip ip-address: Displays the binding information of a specified IP address.
pool [ pool-name ]: Displays the binding information of a specified address pool. The
pool name is a string of 1 to 35 characters. If no pool name is specified, the binding
information of all address pools is displayed.
Description
Use the display dhcp server ip-in-use command to display the binding information of
DHCP address pool(s) or an IP address.
Related commands: reset dhcp server ip-in-use.
Examples
# Display the binding information of all DHCP address pools.
<Sysname> display dhcp server ip-in-use all
Global pool:
IP address
10.1.1.1
Client-identifier/
Hardware address
4444-4444-4444
1-11
Chapter 1 DHCP Server Configuration Commands
to 1.1.1.1
to 2.2.2.5
Lease expiration
NOT Used
Type
Manual