Dhcp Server Relay Information Enable; Dhcp Server Ping Timeout - H3C S7500E Series Command Manual

Command Manual – DHCP
H3C S7500E Series Ethernet Switches
Examples
# Specify the maximum number of ping packets as 1.
<Sysname> system-view
[Sysname] dhcp server ping packets 10

1.1.9 dhcp server ping timeout

Syntax
dhcp server ping timeout milliseconds
undo dhcp server ping timeout
View
System view
Parameters
milliseconds: Response timeout value for ping packets in milliseconds, in the range of 0
to 10,000. 0 means no ping operation.
Description
Use the dhcp server ping timeout command to configure response timeout time of
the ping packet on the DHCP server.
Use the undo dhcp server ping timeout command to restore the default.
The time defaults to 500.
Examples
# Specify the response timeout time as 1000ms.
<Sysname> system-view
[Sysname] dhcp server ping timeout 1000

1.1.10 dhcp server relay information enable

Syntax
dhcp server relay information enable
undo dhcp server relay information enable
View
System view
Parameters
None
Chapter 1 DHCP Server Configuration Commands
1-7