Dhcp Server Relay Information Enable; Dhcp Server Static-Bind - H3C s3600 series Command Manual

dhcp server relay information enable

Syntax
dhcp server relay information enable
undo dhcp server relay information enable
View
System view
Parameters
None
Description
Use the dhcp server relay information enable command to enable the DHCP server to handle Option
82.
Use the undo dhcp server relay information enable command to configure the DHCP server to
ignore Option 82.
By default, the DHCP server handles Option 82.
Examples
# Configure the DHCP server to ignore Option 82.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] undo dhcp server relay information enable

dhcp server static-bind

Syntax
dhcp server static-bind ip-address ip-address { client-identifier client-identifier | mac-address
mac-address }
undo dhcp server static-bind { client-identifier client-identifier | ip-address ip-address |
mac-address mac-address }
View
VLAN interface view
Parameters
ip-address: IP address to be statically bound. Note that the specified IP address must belong to the
same network segment as that of the current VLAN interface.
client-identifier: Client ID of a static binding, a string of 4 to 160 characters in the format H-H-H..., each
H indicates 4 hex digits except the last H that indicates 2 or 4 hex digits. For example, aabb-cccc-dd is
a valid ID, while aabb-c-dddd and aabb-cc-dddd are both invalid.
mac-address: MAC address to which the IP address is statically bound.
1-19