Show Ethernet-Service Sap-Profile - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

show ethernet-service sap-profile

Displays the profile attribute configuration for VLAN Stacking Service Access Point (SAP) profiles.
show ethernet-service sap-profile sap-profile-name
Syntax Definitions
sap-profile-name
Defaults
By default, all SAP profiles are displayed if a SAP profile name is not specified with this command.
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
•
Specify a SAP profile name to display attributes for a single SAP profile.
•
The ingress bandwidth value is displayed in megabytes.
•
The Tri-Color Marking (TCM) parameter values (CIR, CBS, PIR, and PBS) are displayed in kilobytes.
For more information about TCM, see the "Configuring QoS" chapter in the OmniSwitch 6250
Network Configuration Guide.
Examples
-> show ethernet-service sap-profile
Profile Name
-------------------+---------+--------+----------+--------+--------+---+---+---+---
default-sap-profile
sap-video1
sap-video2
sap-data1
-> show ethernet-service sap-profile sap-video1
Profile Name
--------------------+----------+-------------+-----------+----------+-----------+
sap-video1
output definitions
Profile Name
Ingress Bandwidth
page 24-46
Alphanumeric string of up to 32 characters. Use quotes around string if
the profile name contains multiple words with spaces between them
(e.g., "Alcatel-Lucent Engineering").
Ingress Bandwidth Inner Tag Priority Priority
Bandwidth Sharing
0 Enable
20 Disable
10 Disable
15 Enable
Ingress Bandwidth
Bandwidth Sharing
20 Disable
The name of the SAP profile.
The maximum amount of ingress bandwidth (1 = 1,000,000 mbps) to
allow for SAP ports.
Option Mapping Value
Preserve fixed
Preserve in-out
Preserve in-out
Translate fixed
Inner Tag Priority
Option Mapping
Preserve
OmniSwitch CLI Reference Guide
VLAN Stacking Commands
CIR CBS PIR PBS
0 0 0 0 0
P 10 4 20 40
DSCP 100 10 0 0
3 0 0 0 0
Priority
Value
in-out P
November 2009