Configuring A Service Access Point Profile - Alcatel-Lucent OmniSwitch 9900 Series Network Configuration Manual

Configuring VLAN Stacking

Configuring a Service Access Point Profile

The ethernet-service sap-profile
profile. The following command parameters define the traffic engineering attributes that are applied to
customer traffic that is accepted on UNI ports associated with the SAP profile:
Profile Attribute
Ingress bandwidth
sharing
Ingress rate limiting
Egress rate limiting
Bandwidth assignment
Double-tag or translate
Priority mapping
Priority assignment
A default profile, named "default-sap-profile", is automatically assigned to the SAP at the time the SAP is
created (see "Configuring a VLAN Stacking Service Access Point" on page
create a new profile to specify different attribute values if the default profile values (see above) are not
sufficient.
The following command provides an example of creating a new SAP profile to specify a different method
for mapping the SVLAN priority value:
-> ethernet-service sap-profile map_pbit priority map-inner-to-outer-p
In this example the map_pbit profile specifies priority mapping of the CVLAN inner tag 802.1p value to
the SVLAN outer tag value. The other attributes in this profile are set to their default values.
To delete a SAP profile, use the no form of the ethernet-service sap-profile command. For example, the
following command deletes the map_pbit profile:
-> no ethernet-service sap-profile map_pbit
Consider the following when configuring a SAP profile:
OmniSwitch AOS Release 8 Network Configuration Guide
command is used to create a VLAN Stacking service access point (SAP)
Command Parameters
shared | not shared
ingress-bandwidth
egress-bandwidth
bandwidth not-assigned
cvlan | preserve |
translate
map-inner-to-outer-p |
map-dscp-to-outer-p |
fixed
priority not-assigned
Configuring VLAN Stacking Services
Description
Whether or not ingress bandwidth is shared
across UNI ports and CVLANs.
The rate at which customer frames ingress on
UNI ports.
The rate at which customer frames egress on UNI
ports.
Allows QoS policy rules to override profile
attribute values for bandwidth. By default, the
profile bandwidth values take precedence and are
allocated additional QoS system resources.
Determines if a customer frame is tagged with
the SVLAN ID (double-tag) or the CVLAN ID is
changed to the SVLAN ID (translate) when the
frame is encapsulated for tunneling. Double-tag
is used by default.
Determines if the CVLAN (inner tag) 802.1p or
DSCP value is mapped to the SVLAN (outer tag)
802.1p value or if a fixed priority value is used
for the SVLAN 802.1p value. Priority mapping is
set to a fixed rate of zero by default.
Allows QoS policy rules to override profile
attribute values for priority. By default, profile
priority values take precedence and are allocated
additional QoS system resources.
35-15). It is only necessary to
December 2017 page 35-18