Dhcp Server Configuration Commands; Chapter 1 Dhcp Server Configuration Commands - H3C S7500E Series Command Manual

Command Manual – DHCP
H3C S7500E Series Ethernet Switches

Chapter 1 DHCP Server Configuration Commands

Note:
The DHCP server configuration is supported only on VLAN interfaces and loopback
interfaces. The subaddress pool configuration is not supported on loopback
interfaces.
DHCP Snooping must be disabled on the DHCP server.

1.1 DHCP Server Configuration Commands

1.1.1 bims-server
Syntax
bims-server ip ip-address [ port port-number ] sharekey key
undo bims-server
View
DHCP address pool view
Parameters
ip ip-address: Specifies an IP address for the BIMS server.
port port-number: Specifies a port number for the BIMS server in the range 1 to 65534.
sharekey key: Specifies a shared key for the BIMS server, which is a string of 1 to 16
characters.
Description
Use the bims-server command to specify the IP address, port number, and shared key
of the BIMS server in the DHCP address pool for the client.
Use the undo bims-server command to remove BIMS server information assigned
from the DHCP address pool to the DHCP client.
By default, no BIMS server information is specified.
If you execute the bims-server command repeatedly, the latest configuration will
overwrite the previous one.
Related commands: dhcp server ip-pool.
Chapter 1 DHCP Server Configuration Commands
1-1