Ftp Server Configuration Example (On The Sr6602 Router) - H3C SR6600 Fundamentals Configuration Manual

FTP Server Configuration Example (On the SR6602 router)

Network requirements
As shown in
addresses are 1.2.1.1/16 and 1.1.1.1/16 respectively. Device and PC are reachable to each other.
PC keeps the updated boot file of the device. Use FTP to upgrade the device and back up the
configuration file.
Set the username to ftp and the password to pwd for the FTP client to log in to the FTP server.
Figure 6-4 Upgrading using the FTP server
Configuration procedure
1) Configure Device (FTP Server)
# Create an FTP user account ftp, set its password to pwd and the user privilege level to level 3 (the
manage level). Allow user ftp to access the root directory of the cfa0, and specify ftp to use FTP.
<Sysname> system-view
[Sysname] local-user ftp
[Sysname-luser-ftp] password simple pwd
[Sysname-luser-ftp] authorization-attribute level 3
[Sysname-luser-ftp] authorization-attribute work-directory cfa0:/
[Sysname-luser-ftp] service-type ftp
[Sysname-luser-ftp] quit
# Enable FTP server.
[Sysname] ftp server enable
[Sysname] quit
# Check files on your device. Remove those redundant to ensure adequate space for the boot file to be
uploaded.
<Sysname> dir
Directory of cfa0:/
0 drw-
1 drw-
2 -rw-
3 -rw-
2540 KB total (2511 KB free)
<Sysname> delete /unreserved cfa0:/back.cfg
2) Configure the PC (FTP Client)
# Log in to the FTP server through FTP.
c:\> ftp 1.1.1.1
Connected to 1.1.1.1.
220 FTP service ready.
User(1.1.1.1:(none)): ftp
Figure 6-4, use Device as an FTP server, and the PC as the FTP client. Their IP
- Dec 07 2005 10:00:57
- Jan 02 2006 14:27:51
1216 Jan 02 2006 14:28:59
1216 Jan 02 2006 16:27:26
filename
logfile
config.cfg
back.cfg
6-97