Dhcp Server Configuration Commands; Accounting Domain - H3C s3600 series Command Manual

1

DHCP Server Configuration Commands

Support for assigning a TFTP server address and bootfile name from the DHCP server to the client
with auto-configuration function is a new feature in this manual. For specific commands, see
bootfile-name,
tftp-server ip-address,
DHCP-snooping option 82 is a new feature in this manual. For specific commands, see
dhcp-snooping information enable
IP filtering is a new feature in this manual. For specific commands, see
binding, ip check source
DHCP packet rate limit is a new feature in this manual. For specific commands, see
Configuration
The contents of this chapter are only applicable to the S3600-EI series among S3600 Series Ethernet
Switches.
DHCP Server Configuration Commands

accounting domain

Syntax
accounting domain domain-name
undo accounting domain
View
DHCP address pool view
Parameters
domain-name: Name of a domain, a string of 1 to 24 characters. (You can use the domain command to
create a domain.)
Description
Use the accounting domain command to enable the DHCP accounting function.
dhcp server bootfile-name,
tftp-server domain-name, and
to
ip-address, and
Commands.
dhcp server tftp-server
tftp-server
dhcp-snooping information vlan
ip source static binding.
1-1
domain-name, dhcp server
ip-address.
remote-id.
display ip source static
Rate Limit