Display Reboot-Type; Display Schedule Reboot - H3C MSR 20-20 Command Reference Manual

2258 C 148: D
HAPTER EVICE

display reboot-type

Syntax
View
Parameter
Description
Example

display schedule reboot

Syntax
View
Parameter
Description
Related command:
Example
M C
ANAGEMENT OMMANDS
<Sysname> display power
Power 1 State: Absent
Power 2 State: Normal
Power 3 State: Absent
The above information indicates that power supply 2 works normally, and power
supply 1 and power supply 3 are absent.
display reboot-type [ slot slot-number ]
Any view
slot slot-number: Displays reboot type of the specified card, where slot-number
represents the slot number of a card. The value range varies with devices.
Use the
display reboot-type
# Display the reboot type of the card in slot 2 of the device.
<Sysname> display reboot-type slot 2
The rebooting type this time is: Cold
The above information indicates that the last reboot type of the device is Cold
boot. (If it is displayed as Warm, it indicates the reboot type is ware boot).
display schedule reboot
Any view
None
Use the
display schedule reboot
set by the user.
schedule reboot at and schedule reboot delay.
# Display the reboot time of a device.
<Sysname> display schedule reboot
System will reboot at 16:00:00 2006/03/10 (in 2 hours and 5 minutes).
The above information indicates the system will reboot at 16:00:00 on March 10,
2006 (in two hours and five minutes).
command to display the reboot type of a device.
command to display the device reboot time