Display Nqa - H3C MSR 20-20 Command Reference Manual

2268 C 149: NQA C
HAPTER

display nqa

Syntax
View
Parameter
Description
Example
C C
LIENT ONFIGURATION OMMANDS
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-echo
[Sysname-nqa-admin-test-udp-echo] destination port 9000
display nqa { result | history } [ admin-name operation-tag ]
Any view
result: Displays the results of the last test.
history: Displays the history records of a test.
admin-name: Specifies the name of the administrator who creates NQA
operations, a string of 1 to 32 characters. It is case-insensitive.
operation-tag: Specifies the test operation tag, a string of 1 to 32 characters. It is
case-insensitive.
Use the
display nqa
or tests.
If neither of the test group arguments (admin-name and operation-tag) is
specified, information of all test groups is displayed.
# Display the results of the last test.
<Sysname> display nqa result administrator jitter
NQA entry(admin administrator, tag jitter) test results:
Destination IP address: 192.168.0.81
Send operation times: 10
Min/Max/Average round trip time: 0/0/0
Square-Sum of round trip time: 0
Last succeeded probe time: 0-00-00 00:00:00.0
Extend results:
Packet lost in test: 100%
Failures due to timeout: 10
Failures due to disconnect: 0
Failures due to no connection: 0
Failures due to sequence error: 0
Failures due to internal error: 0
Failures due to other errors: 0
UDP-jitter results:
RTT number: 0
SD max delay: 0
Min positive SD: 0
Max positive SD: 0
Positive SD number: 0
Positive SD sum: 0
Positive SD average: 0
Positive SD square sum: 0
Min negative SD: 0
Max negative SD: 0
Negative SD number: 0
Negative SD sum: 0
command to display operation information of an NQA test
Receive response times: 0
DS max delay: 0
Min positive DS: 0
Max positive DS: 0
Positive DS number: 0
Positive DS sum: 0
Positive DS average: 0
Positive DS square sum: 0
Min negative DS: 0
Max negative DS: 0
Negative DS number: 0
Negative DS sum: 0