Ssh Client Authentication Server; Ssh Client First-Time Enable - H3C MSR 20-20 Command Reference Manual

2190 C 142: SSH2.0 C
HAPTER

ssh client authentication server

Syntax
View
Parameter
Description
Example

ssh client first-time enable

Syntax
View
Parameter
Description
C
ONFIGURATION OMMANDS
ssh client authentication server server assign publickey keyname
undo ssh client authentication server server assign publickey
System view
server: IP address or name of the server, a string of 1 to 80 characters.
assign publickey keyname: Specifies the name of the host public key of the
server, which is a string of 1 to 64 characters.
Use the
ssh client authentication server
public key of the server so that the client can determine whether the server is
trustworthy.
Use the
undo ssh authentication server
configuration.
By default, the host public key of the server is not configured, and when logging
into the server, the client uses the IP address or host name used for login as the
public key name.
# Configure the public key of the server with the IP address of 192.168.0.1 to be
key1.
<Sysname> system-view
[Sysname] ssh client authentication server 192.168.0.1 assign rsa-key key1
ssh client first-time enable
undo ssh client first-time
System view
None
Use the
ssh client first-time enable
authentication function.
Use the
undo ssh client first-time
By default, the function is enabled.
When an SSH client tries to access a server whose public host key it does not know
for the first time, the first authentication function enables it to access the server
and obtain and save the public host key of the server. When the client accesses the
command to configure the host
command to remove the
command to enable the first
command to disable the function.