Standby Bandwidth - H3C MSR 20-20 Command Reference Manual

Msr 20/30/50 series routers
Hide thumbs Also See for MSR 20-20:
Table of Contents

Advertisement

standby bandwidth

Syntax
View
Parameter
Table 585 Backup states of the backup interface
State
Description
UPDELAY
The backup interface is experiencing a delay before it transits from the
non-working state to the working state to take over.
DOWN
The backup interface cannot work normally.
DOWNDELAY
The backup interface is experiencing a delay before it transits from the
working state to the non-working state. At this time, the backup interface
is probably still working.
STANDBY
State of the backup interface when the main interface is working. At this
time, the backup interface cannot send or receive data.
Table 586 Backup flags
Flag
Description
M---MAIN
Indicates that the interface is a main one.
B---BACKUP
Indicates that the interface is a backup one.
V---MOVED
Indicates that the interface or the main interface of the interface, or all
backup interfaces of the interface are all removed.
U---USED
Indicates that the interface is being used as a main interface or backup
interface.
D---LOAD
Indicates that the main interface participates in load sharing.
P---PULLED
Indicates that the interface board where the interface is located is
removed.
Table 587 Load sharing states
State
Description
WAKE
The backup interface is working in the load sharing state to transmit
data together with the main interface.
TO-HYPNOTIZE
The backup interface is transiting from the working state to the
non-working state after the traffic size decreases below the lower
backup load sharing threshold. In this state, the backup interface is still
working.
TO-WAKE
The backup interface is transiting from the non-working state to the
working state after the traffic size increases above the upper backup
load sharing threshold.
Null
State other than the above three. At this time, the value for the
loadstate field is null.
standby bandwidth size
undo standby bandwidth
Interface view
size: Specifies the main interface bandwidth used for setting the thresholds, in the
range 0 to 4000000 kbps.
2219

Advertisement

Table of Contents
loading

This manual is also suitable for:

Msr 20-21Msr 30-16Msr 30-20Msr 30-40Msr 30-60Msr 50 ... Show all

Table of Contents