Sftp Client Source; Sftp Ipv6 - H3C MSR 20-20 Command Reference Manual

Description
Example

sftp client source

Syntax
View
Parameter
Description
Related command:
Example

sftp ipv6

Syntax
View
Use the
sftp client ipv6 source
source interface for an SFTP client.
Use the
undo sftp client ipv6 source
By default, the client uses the interface address specified by the route of the device
to access the SFTP server.
# Specify the source IPv6 address of the SFTP client as 2:2::2:2.
<Sysname> system-view
[Sysname] sftp client ipv6 source ipv6 2:2::2:2
sftp client source { ip ip-address | interface interface-type interface-number }
undo sftp client source
System view
ip ip-address: Specifies a source IPv4 address.
interface interface-type interface-number: Specifies a source interface by its type
and number.
Use the
sftp client source
interface of an SFTP client.
Use the
undo sftp source-interface
By default, a client uses the IP address or interface specified by the route to access
the SFTP server.
display sftp client source.
# Specify the source IP address of the SFTP client as 192.168.0.1.
<Sysname> system-view
[Sysname] sftp client source ip 192.168.0.1
sftp ipv6 server [ port-number ] [ identity-key { dsa | rsa } | prefer-ctos-cipher
{ 3des | aes128 | des } | prefer-ctos-hmac { md5 | md5-96 | sha1 | sha1-96 } |
prefer-kex { dh-group-exchange | dh-group1 | dh-group14 } | prefer-stoc-cipher
{ 3des | aes128 | des } | prefer-stoc-hmac { md5 | md5-96 | sha1 | sha1-96 } ] *
User view
command to specify the source IPv6 address or
command to remove the configuration.
command to specify the source IPv4 address or
command to remove the configuration.
2187