Standby Timer Flow-Check; Standby Track - H3C MSR 20-20 Command Reference Manual

standby timer flow-check

Syntax
View
Parameter
Description
Related command:
Example

standby track

Syntax
View
Parameters
Description
standby timer flow-check interval
undo standby timer flow-check
Interface view
interval: Specifies flow check interval, in the range 30 to 600 seconds.
Use the
standby timer flow-check
checking the traffic size on the main interface.
Use the undo standby timer flow-check
By default, the interval for checking the traffic size on the main interface is 30
seconds.
Note that this command can be executed after backup interfaces are specified.
standby interface.
# Configure load sharing, backup bandwidth and flow check interval on interface
Serial 2/0 to 60 seconds.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] standby timer flow-check 60
standby track track-entry-number
undo standby track
Interface view
track-entry-number: Specifies a Track object to be monitored by its number, in the
range 1 to 1024.
Use the
standby track
interface and a Track object.
Use the undo standby track
By default, an interface is not associated with a Track object.
Note that:
command to configure the interval for
command to restore the default.
command to configure the association between an
command to remove the association.
2223