2266
C
149: NQA C
HAPTER
data-size
Syntax
View
Parameter
Description
Example
description (any NQA test type view)
Syntax
View
Parameter
Description
Example
C
C
LIENT
ONFIGURATION
OMMANDS
data-size size
undo data-size
ICMP-echo/UDP-echo/UDP-jitter test type view
size: Size of a probe packet in bytes, in the range 20 to 8100 for an ICMP-echo or
a UDP-echo test and in the range 68 to 8100 for a UDP-jitter test.
Use the
data-size
the size of a packet sent (IP header and ICMP header excluded) in a probe.
Use the
undo data-size
By default, the size of a probe packet is 100 bytes.
# Configure the size of an ICMP-echo probe packet as 80 bytes.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] data-size 80
description text
undo description
Any NQA test type view
text: Descriptive string of a test group, in the range 1 to 200 characters. It is case
sensitive.
Use the
description
the test type or test purpose of a test group.
Use the
undo description
information.
By default, no descriptive string is available for a test group.
# Configure the descriptive string for a test group as icmp-probe.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] description icmp-probe
command to configure the size of a probe packet sent, namely,
command to restore the default.
command to give a brief description of a test group, usually,
command to remove the configured description