H3C MSR 20-20 Command Reference Manual page 2224

2224 C 145: B
HAPTER ACKUP
Related commands:
n
Examples
C C C
ENTER ONFIGURATION OMMANDS
This command and the standby interface command cannot be configured at
■
the same time. That is, if you have configured the standby interface
command on the main interface, you cannot configure the standby track
command on both the main interface and its backup interface; if you have
associated an interface with a Track object, you cannot configure the interface
as the main interface or a backup interface.
One interface can be associated with one Track object. If you execute this
■
command repeatedly on one interface, the new configuration will overwrite
the original one.
You can associate an interface with a nonexistent Track object. The track
■
function can take effect after the Track object is created with the track
command.
standby interface, track on page 2529.
Support for this command varies with devices.
# Configure interface Serial 2/0 to be associated with Track object 1.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] standby track 1