Display Standby Flow - H3C MSR 20-20 Command Reference Manual

145

display standby flow

Syntax
View
Parameter
Description
Example
B C
ACKUP
C
OMMANDS
display standby flow
Any view
None
Use the
display standby flow
main interfaces participating in load sharing.
# Display statistics about the traffic on the main interfaces participating in load
sharing.
<Sysname> display standby flow
Interfacename : Serial2/0
Flow-interval(s) : 100
LastInOctets : 868168
LastOutOctets : 1818667
InFlow(Octets) : 50070
OutFlow(Octets) : 100088
BandWidth(b/s) : 9000
UsedBandWidth(b/s) : 8000
Table 582 Description on the fields of the display standby flow command
Field
Interfacename
Flow-interval(s)
LastInOctets
LastOutOctets
InFlow(Octets)
OutFlow(Octets)
BandWidth(b/s)
UsedBandWidth(b/s)
C
ENTER ONFIGURATION
command to display statistics about traffic on the
Description
Name of the main interface
Intervals for checking traffic on the main interface
Sum of the octets received on the main interface until the last
check
Sum of the octets sent on the main interface until the last check
Sum of the octets received on the main interface during the last
interval
Sum of the octets sent on the main interface during the last
interval
Bandwidth of the main interface
Actual bandwidth for the main interface participating in load
sharing during the last interval