Description
Example
operation interface
Syntax
View
Parameter
Description
Example
password (FTP test type view)
Syntax
View
Use the
command to configure the HTTP operation type.
operation
Use the
undo operation
By default, the HTTP operation type is get.
# Configure the HTTP operation type as post.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type http
[Sysname-nqa-admin-test-http] operation post
operation interface interface-type interface-number
undo operation interface
DHCP test type view
interface-type interface-number: Type and number of the interface that is
performing a DHCP test.
Use the
operation interface
DHCP test.
Use the
undo operation interface
interface to perform the DHCP test.
By default, no interface is specified to perform a DHCP test.
Note that the specified interface must be up; otherwise, the test will fail.
# Specify the interface to perform a DHCP test as Ethernet 1/0.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type dhcp
[Sysname-nqa-admin-test-dhcp] operation interface ethernet 1/0
password password
undo password
FTP test type view
command to restore the default.
command to specify the interface to perform a
command to remove the configured
2277