License Register; Reboot - H3C MSR 20-20 Command Reference Manual

license register

Syntax
View
Parameter
Description
Example

reboot

Syntax
View
Parameter
Description
Example
license register serial-number
User view
serial-number: Specifies the serial number of a card, in the format of
XXXXX-XXXXX-XXXXX-XXXXX-XXXXX-XXXXX-XXXXX, in which X represents a
character. The character can be a letter (case sensitive), a number, + or (/).
Use the
license register
device.
The serial number can be obtained by purchasing letter of authorization. To
successfully register a serial number, you must enter the serial number in the
specified format.
n
Only users at management level can execute this command.
# Register the software serial number of a device.
<Sysname> system-view
[Sysname] license register VZa47-6AbBh-gtO9c-K47A0-F79D8-dE84O-tg2j0
Register successfully!
reboot [ slot slot-number ]
User view
slot slot-number: Specifies the slot number of a card. The value range varies with
devices.
Use the reboot
c
CAUTION:
This command reboots the device, thus resulting in service interruption. Please
■
use it with caution.
If a primary boot file fails or does not exist, the device cannot be rebooted with
■
this command. In this case, you can re-specify a primary boot file to reboot the
device, or you can power off the device then power it on and the system
automatically uses the secondary boot file to restart the device.
The slot keyword is applicable on an MSR 50 series router only.
■
# Reboot the device.
command to register the software serial number for a
command to reboot a card or a device.
2259