Display Sftp Client Source - H3C MSR 20-20 Command Reference Manual

display sftp client source

Syntax
View
Parameter
Description
Related command:
<Sysname> display public-key peer name idrsa
=====================================
Key name : idrsa
Key type : RSA
Key module: 1024
=====================================
Key Code:
30819D300D06092A864886F70D010101050003818B00308187028181009C46A87102
16CEC0C01C7CE136BA76C79AA6040E79F9E305E453998C7ADE8276069410803D5974
F708496947AB39B3F39C5CE56C95B6AB7442D56393BF241F99A639DD02D9E29B1F5C
1FD05CC1C44FBD6CFFB58BE6F035FAA2C596B27D1231D159846B7CB9A7757C5800FA
DA9FD72F65672F4A549EE99F63095E11BD37789955020123
Table 574 Description on fields of the display public-key peer command
Field
Key name
Key type
Key module
Key code
# Display brief information about all public keys.
<Sysname> display public-key peer brief
Type Module Name
---------------------------
RSA 1024 idrsa
DSA 1024 10.1.1.1
Table 575 Description on the fields of the display public-key peer brief command
Field
Type
Module
Name
display sftp client source
Any view
None
Use the
display sftp client source
source interface currently set for the SFTP client.
If neither source IP address nor source interface is specified for the SFTP client,
"You didn't specify the source" will be displayed.
sftp client source.
Description
Name of the key
Type of the key
Module of the key
Code of the key
Description
Type of the key
Number of bits in the peer public key
Name of the peer public key
command to display the source IP address or
2175