Http-Version; Next-Hop - H3C MSR 20-20 Command Reference Manual

http-version

Syntax
View
Parameter
Description
Example

next-hop

Syntax
View
Parameter
Description
Example
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] history-records 10
http-version v1.0
undo http-version
HTTP test type view
v1.0: The HTTP version is 1.0 in an HTTP test.
Use the
http-version
test.
Use the undo http-version
By default, HTTP 1.0 is used in an HTTP test.
# Configure the HTTP version as 1.0 in an HTTP test.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type http
[Sysname-nqa-admin-test-http] http-version v1.0
next-hop ip-address
undo next-hop
ICMP-echo test type view
ip-address: IP address of the next hop.
Use the next-hop command to configure the next hop IP address for an IP
packet.
Use the
undo next-hop
By default, no next hop IP address is configured.
# Configure the next hop IP address as 10.1.1.1.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] next-hop 10.1.1.1
command to configure the HTTP version used in an HTTP
command to restore the default.
command to remove the configured next hop IP address.
2273