Nqa Agent Enable - H3C MSR 20-20 Command Reference Manual

2274 C 149: NQA C
HAPTER
nqa
Syntax
View
Parameter
Description
Example

nqa agent enable

Syntax
View
Parameter
Description
Related command:
C C
LIENT ONFIGURATION OMMANDS
nqa entry admin-name operation-tag
undo nqa { all | entry admin-name operation-tag }
System view
admin-name: Specifies the name of the administrator who creates the NQA test
operation, a string of 1 to 32 characters, with "-" excluded. It is case-insensitive.
operation-tag: Specifies the tag of a test operation, a string of 1 to 32 characters,
with "-" excluded. It is case-insensitive.
all: All NQA test groups.
Use the command to create an NQA test group and enter NQA test group
nqa
view.
Use the
undo nqa
Note that if the test type has been configured for the test group, you will directly
enter NQA test type view when you execute the nqa command.
# Create an NQA test group whose administrator name is admin and whose
operation tag is test and enter NQA test group view.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test]
nqa agent enable
undo nqa agent enable
System view
None
Use the
nqa agent enable
Use the
undo nqa agent enable
all the tests being performed.
By default, the NQA client is enabled.
nqa server enable.
command to remove the test group.
command to enable the NQA client.
command to disable the NQA client and stop