Time-Out - H3C MSR 20-20 Command Reference Manual

2172 C 141: IKE C
HAPTER
Related command:
Example

time-out

Syntax
View
Parameter
Description
Example
C
ONFIGURATION OMMANDS
Before an SA expires, IKE will negotiate a new SA. As soon as the new SA is set up,
it takes effect immediately and the old one will be cleared automatically when it
expires.
ike proposal and display ike proposal.
# Specify the ISAKMP SA lifetime for IKE proposal 10 as 600 seconds (10 minutes).
<Sysname> system-view
[Sysname] ike proposal 10
[Sysname-ike-proposal-10] sa duration 600
time-out time-out
undo time-out
IKE DPD view
time-out: DPD packet retransmission interval in seconds, in the range 1 to 60.
Use the
time-out
DPD.
Use the undo time-out
By default, the DPD packet retransmission interval is 5 seconds.
# Set the DPD packet retransmission interval for dpd2 to 1 second.
<Sysname> system-view
[Sysname] ike dpd dpd2
[Sysname-ike-dpd-dpd2] time-out 1
command to set the DPD packet retransmission interval for a
command to restore the default.