Reset Unused Porttag; Remove - H3C MSR 20-20 Command Reference Manual

2260 C 148: D
HAPTER EVICE

remove

Syntax
View
Parameter
Description
Example

reset unused porttag

Syntax
View
Parameter
Description
M C
ANAGEMENT OMMANDS
<Sysname> reboot
Start to check configuration with next startup configuration file, please wait
......
This command will reboot the device. Current configuration will be lost in next
startup if you continue. Continue? [Y/N]:y
This will reboot device. Continue? [Y/N]:y
#Nov 20 12:00:42:698 2006 Sysname COMMONSY/4/REBOOT:
Reboot device by command.
%Nov 20 12:00:42:699 2006 Sysname DEV/4/SYSTEM REBOOT:
System is rebooting now.
Now rebooting, please wait...
remove slot slot-number
User view
slot slot-number: Specifies the slot number of a card. The value range varies with
devices.
Use the
remove
n
This command is supported only on MSR 50 series routers.
c
CAUTION:
This command may cause a card unusable, thus resulting in service
■
interruption. Use it with caution.
Use the
remove slot
■
otherwise the device or the card may be broken.
# Remove card 8.
<Sysname>remove slot 8
You can not configure the slot now.
Please wait...
You can remove the card now.
reset unused porttag
User view
None
Use the reset unused porttag
used in the current system.
command to remove a card.
command to remove a card before hot swapping it;
command to clear the 16-bit index saved but not