Chapter 1 Lr Configuration Commands; Display Qos Lr Interface - H3C S7500E Series Command Manual

Command Manual – QoS
H3C S7500E Series Ethernet Switches

Chapter 1 LR Configuration Commands

1.1 LR Configuration Commands

1.1.1 display qos lr interface

Syntax
display qos lr interface [ interface-type interface-number ]
View
Any view
Parameters
interface-type: Port type.
interface-number: Port number.
Description
Use the display qos lr interface command to display the LR configuration information
of a certain interface or all interfaces.
If the interface argument is not specified, this command will display the LR
configuration information of all the interfaces.
Examples
# Display the LR configuration and statistics information of all the interfaces.
<Sysname> display qos lr interface
Interface: Ethernet2/0/10
Direction: Outbound
CIR 64000 (kbps),
Table 1-1 Description on the fields of the display qos lr command
Interface
Direction
CIR
CBS
CBS 4000000 (byte)
Field
Port name, composed of port type and port number
Specify the direction of limited rate as outbound
Committed information rate, in kbps
Committed burst size, in byte
Chapter 1 LR Configuration Commands
Description
1-1