Ssh Client Authentication Server; Ssh Client First-Time Enable - H3C S7500E Series Command Manual

Hide thumbs Also See for S7500E Series:

Table of Contents

Command Manual – SSH

H3C S7500E Series Ethernet Switches

1.1.22 ssh client authentication server

ssh client authentication server server assign publickey keyname

undo ssh client authentication server server assign publickey

server: IP address or name of the server, a string of 1 to 80 characters.

keyname: Name of the host public key of the server, a string of 1 to 64 characters.

Use the ssh client authentication server command to configure the host public key of

the server so that the client can determine whether the server is trustworthy.

Use the undo ssh authentication server command to remove the configuration.

By default, the host public key of the server is not configured, and when logging into the

server, the client uses the IP address or host name used for login as the public key

# Configure the public key of the server with the IP address of 192.168.0.1 to be key1.

<Sysname> system-view

[Sysname] ssh client authentication server 192.168.0.1 assign rsa-key key1

ssh client first-time enable

undo ssh client first-time

Chapter 1 SSH Configuration Commands

Table of Contents