Table of Contents
Advertisement
Chapter 6 Connectors for ports of device
6.1
R20UT3852ED0100 Rev. 1.0
2016-08-04
Connection to each functional pin of the device is possible via the connectors
CN5 to CN8. For detailed explanation of their function, please refer to the user
documentation of the device.
CAUTION: The pin headers are directly connected to the pins of the device,
therefore special care must be taken to avoid any electrostatic or other damage
to the device.
The following signals/device ports are not available at the connectors CN5 to
CN8:
Device Port
TODP0
TODN0
TODP1
TODN1
CICREFP
CICREFN
AUDATA0
AUDATA1
AUDATA2
AUDATA3
AUDCK
AUDSYNCZ
AUDRSTZ
Connectors for ADC voltage supply
It is possible to apply the ADC related supply voltages via SMA connectors
(CN10, CN11, CN13 and CN14). These are directly connected (JP7 and 9 are
bypassed) to the following pins of the device
Device Port
ADC0I0
A0VREFH
ADC1I0
A1VREFH
The SMA connectors are not mounted on nor provided with the boards. SMA
connectors that fit to the following mounting holes available on the board can be
mounted on the board.
11
Advertisement
Table of Contents
