ADTRAN AOS Version R10.1.0 Command Reference Manual page 2518

Command Reference Guide
ip ospf network
Use the ip ospf network command to specify the type of network on this interface. Use the no form of this
command to return to the default setting. Variations of this command include:
ip ospf network broadcast
ip ospf network point-to-point
Syntax Description
broadcast
point-to-point
Default Values
By default, Ethernet defaults to broadcast. Point-to-Point Protocol (PPP) and Frame Relay default to
point-to-point.
Command History
Release 3.1
Functional Notes
A point-to-point network will not elect designated routers.
Usage Examples
The following example designates a broadcast network type:
(config)#interface ppp 1
(config-ppp 1)#ip ospf network broadcast
60000CRG0-35E
Sets the network type for broadcast.
Sets the network type for point-to-point.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
PPP Interface Command Set
2518