Ipv6 Pim Query-Interval - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ipv6 pim query-interval

Syntax
Release Information
Description
Options
Mode
1090
ipv6 pim query-interval queryTime
no ipv6 pim query-interval
Command introduced before JunosE Release 7.1.0.
Specifies how often the router sends PIM router query messages from this interface. The
no version specifies the default time interval, 30 seconds.
queryTime—Interval in the range 0–210 seconds at which the router sends PIM router
query messages from this interface
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.