Ethoam Association - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

Ethernet OAM Commands

ethoam association

Creates an Ethernet OAM Maintenance Association (MA) in the specified domain.
ethoam association association_name format {string | integer | vpnId | primaryVid}
domain {domain_name | mac_address} vlan vlan_id
no ethoam association association_name domain {domain_name | mac_address}
Syntax Definitions
association_name
string
integer
vpnId
primaryVid
domain_name
mac_address
vlan_id
Defaults
N/A
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
•
Use the no form of this command to remove the Ethernet OAM Maintenance Association.
•
The association_name should be unique within a domain.
Examples
-> ethoam association alcatel-sales format string domain esd.alcatel-lucent.com
vlan 10
-> no ethoam association alcatel-sales domain esd.alcatel-lucent.com
Release History
Release 6.6.1; command was introduced.
OmniSwitch 6250 CLI Reference Guide
Name of the Ethernet OAM Association. Up to 48 (minus domain name
length) characters may be used.
Specifies the association name as a string.
Specifies the association name as a 2-octet integer.
RFC 2685 VPN ID.
Specifies the primary VLAN ID.
Specifies the domain name. For more information on the different
formats of the domain name, refer to
page 25-3.
Specifies the CFM system MAC address.
VLAN ID of the service instance monitored by the Maintenance
Association.
November 2009
ethoam domain command on
page 25-7