Ethoam Domain Mhf - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

Ethernet OAM Commands

ethoam domain mhf

Modifies the Message Handling Function (MHF) value of an Ethernet domain.
ethoam domain {domain_name | mac_address} mhf {none | explicit | default}
Syntax Definitions
domain_name
mac_address
none
explicit
default
Defaults
parameter
none | explicit | default
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
The domain_name should be unique amid all those used by or available to the service provider.
Examples
-> ethoam domain esd.alcatel-lucent.com mhf explicit
Release History
Release 6.6.1; command was introduced.
OmniSwitch 6250 CLI Reference Guide
Domain name of the Ethernet domain. The length of the domain name
varies depending on its format.
Specifies the CFM system MAC address.
Specifies that no MHFs can be created for the specified VLAN ID.
Specifies that MHFs can be created for the specified VLAN ID only on
Bridge ports through which this VLAN ID can pass and only if a Main-
tenance End Point (MEP) is created at a lower MD level.
Specifies that MHFs can be created on the specified VLAN ID on any
Bridge port through which this VLAN ID can pass.
default
none
November 2009 page 25-5