Nqa Server Enable; Nqa Server Tcp-Connect - H3C MSR 20-20 Command Reference Manual

2290 C 150: NQA S
HAPTER

nqa server enable

Syntax
View
Parameter
Description
Related command:
Example

nqa server tcp-connect

Syntax
View
Parameter
Description
C C
ERVER ONFIGURATION OMMANDS
Table 602 Description on the fields of the display nqa server status command
Field
Status
nqa server enable
undo nqa server enable
System view
None
Use the
nqa server enable
Use the
undo nqa server enable
By default, the NQA server is disabled.
nqa server tcp-connect, nqa server udp-echo.
# Enable the NQA server.
<Sysname> system-view
[Sysname] nqa server enable
nqa server tcp-connect ip-address port-number
undo nqa server tcp-connect ip-address port-number
System view
ip-address: IP address specified for the TCP listening service on the NQA server.
port-number: Port number specified for the TCP listening service on the NQA
server, in the range 1 to 50000.
Use the
nqa-server tcp-connect
the NQA server.
Use the
undo nqa-server tcp-connect
service created.
Description
Listening service status:
active: Listening service is ready;
inactive: Listening service is not ready.
command to enable the NQA server.
command to disable the NQA server.
command to create a TCP listening service on
command to remove the TCP listening