Probe Packet-Timeout; Probe Timeout - H3C MSR 20-20 Command Reference Manual

2280 C 149: NQA C
HAPTER
Example

probe packet-timeout

Syntax
View
Parameter
Description
Example

probe timeout

Syntax
View
Parameter
Description
C C
LIENT ONFIGURATION OMMANDS
# Configure the number of consecutive packets in a UDP-jitter probe as 100.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-jitter
[Syaname-nqa-admin-test-udp-jitter] probe packet-number 100
probe packet-timeout packet-timeout
undo probe packet-timeout
UDP-jitter test type view
packet-timeout: Timeout time for waiting for responses in a UDP-jitter test, in the
range 10 to 3600000 milliseconds.
Use the
probe packet-timeout
waiting for responses in a UDP-jitter test.
Use the
undo probe packet-timeout
By default, the timeout time in a UDP-jitter test is 3000 milliseconds.
# Configure the timeout time for waiting for responses in a UDP-jitter test as 100
milliseconds.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-jitter
[Syaname-nqa-admin-test-udp-jitter] probe packet-timeout 100
probe timeout timeout
undo probe timeout
DHCP/DLSw/FTP/HTTP/ICMP-echo/SNMP/TCP/UDP-echo test type view
timeout: Timeout time in a probe except UDP-jitter probe, in milliseconds. For an
FTP or HTTP probe, the value range is 10 to 86400000; for a DHCP, DLSw,
ICMP-echo, SNMP, TCP or UDP-echo probe, the value range is 10 to 3600000.
Use the
probe timeout
Use the
undo probe timeout
By default, the timeout time is 3000 milliseconds.
command to configure the timeout time for
command to restore the default.
command to configure the timeout time in a probe.
command to restore the default.