Display Qos-Interface Traffic-Redirect; Display Qos-Interface Traffic-Remark-Vlanid - H3C s3600 series Command Manual

Matches: Acl 2000 rule 0
Priority action: dscp ef
Refer to Table 1-3

display qos-interface traffic-redirect

Syntax
display qos-interface { interface-type interface-number | unit-id } traffic-redirect
View
Any view
Parameters
interface-type interface-number: Specifies the type and number of a port for which traffic redirecting
configuration is to be displayed.
unit-id: Unit ID of the switch whose traffic redirecting configuration is to be displayed. For the value
range for the unit-id argument, refer to
Description
Use the display qos-interface traffic-redirect command to display the traffic redirecting configuration
of a port or a unit.
Related commands: traffic-redirect.
Examples
# Display the traffic redirecting configuration of Ethernet 1/0/1.
<Sysname> display qos-interface Ethernet1/0/1 traffic-redirect
Ethernet1/0/1: traffic-redirect
Inbound:
Matches: Acl 3000 rule 0
Redirected to: interface Ethernet1/0/2
Refer to Table 1-3

display qos-interface traffic-remark-vlanid

Syntax
display qos-interface { interface-type interface-number | unit-id } traffic-remark-vlanid
View
Any view
Parameters
interface-type interface-number: Specifies the type and number of a port for which VLAN mapping
configuration is to be displayed.
unit-id: Unit ID of the switch whose VLAN mapping configuration is to be displayed. For the value range
for the unit-id argument, refer to
running
for the description on the output fields.
Table
running
for the description on the output fields.
Table 1-2.
1-2.
1-9