Ip Netstream Max-Entry; Ip Netstream Timeout Active - H3C MSR 20-20 Command Reference Manual

Example

ip netstream max-entry

Syntax
View
Parameter
Description
Example

ip netstream timeout active

Syntax
View
Parameter
Description
Related command:
# Set the NetStream statistics packet version number to 5 and the AS option to
origin-as.
<Sysname> system-view
[Sysname] ip netstream export version 5 origin-as
ip netstream max-entry max-entries
undo ip netstream max-entry
System view
max-entries: NetStream cache size. The value ranges from 1000 to 1000000 and
defaults to 10000.
Use the
ip netstream max-entry
meaning maximum number of entries that the NetStream cache can
accommodate.
Use the undo ip netstream max-entry
# Set the NetStream cache size to 5000.
<Sysname> system-view
[Sysname] ip netstream max-entry 5000
ip netstream timeout active minutes
undo ip netstream timeout active
System view
minutes: Sets the length of the active aging timer for NetStream cache entries, in
the range 1 to 60 minutes. The default value is 30 minutes.
Use the ip netstream timeout active
for NetStream cache entries.
Use the
undo ip netstream timeout active
ip netstream timeout inactive.
c
CAUTION: You can configure the active aging timer and inactive aging timer at the
same time. When either one of them times out, the entry ages out. The time
precision is 10 seconds.
command to set the NetStream cache size,
command to restore the default.
command to set the active aging timer
command to restore the default.
2299