Display Ntp-Service Status - H3C MSR 20-20 Command Reference Manual

2302 C 152: NTP C
HAPTER

display ntp-service status

Syntax
View
Parameter
Description
Example
C
ONFIGURATION OMMANDS
Table 605 Description on the fields of the display ntp-service sessions command
Field
now
offset
delay
disper
[12345]
Total
associations
n
When a device is working in the NTP broadcast/multicast server mode, the display
ntp-service sessions command executed on the device will not display the NTP
session information corresponding to the broadcast/multicast server, but the
sessions will be counted in the total number of associations.
display ntp-service status
Any view
None
Use the
display ntp-service status
information.
# View the NTP service status information.
<Sysname> display ntp-service status
Clock status: unsynchronized
Clock stratum: 16
Reference clock ID: none
Nominal frequency: 100.0000 Hz
Actual frequency: 100.0000 Hz
Clock precision: 2^17
Clock offset: 0.0000 ms
Root delay: 0.00 ms
Root dispersion: 0.00 ms
Peer dispersion: 0.00 ms
Reference time: 00:00:00.000 UTC Jan 1 1900(00000000.00000000)
Description
The length of time in minutes from when the last NTP message was received
or when the local clock was last updated to the current time
The time is in second by default. If the time length is greater than 2048
seconds, it is displayed in minute; if greater than 300 minutes, in hour; if
greater than 96 hours, in day.
The offset of the system clock relative to the reference clock, in milliseconds
the roundtrip delay from the local device to the clock source, in milliseconds
The maximum error of the system clock relative to the reference source.
1: Clock source selected by the system, namely the current reference source,
with a system clock stratum level of ≤ 15
2: Stratum level of this system source is ≤ 15
3: This clock source has passed the clock selection process
4: This clock source is a candidate clock source
5: This clock source was created by a configuration command
Total number of associations
command to view the NTP service status