enable
Syntax
View
Parameter
Description
Related command:
Example
ip netstream
Syntax
View
Table 604 Description on the fields of the display ip netstream export command
Field
Version 5 export information
Stream source interface
Stream destination IP(UDP)
Exported stream number
Exported UDP datagram number(failed number)
Version 8 AS aggregation export information
Version 8 tos-source-prefix export information
enable
undo enable
NetStream aggregation view
None
Use the
command to enable current aggregation mode.
enable
Use the
undo enable
By default, no aggregation mode is enabled.
ip netstream aggregation.
# Enable NetStream AS aggregation.
<Sysname> system-view
[Sysname] ip netstream aggregation as
[Sysname-aggregation-as] enable
ip netstream { inbound | outbound }
undo ip netstream { inbound | outbound }
Interface view
Description
Statistics for exported version 5 statistics
packets
Source interface of exported UDP packets
Destination address and port number of
exported UDP packets
Number of exported streams
Number of exported UDP packets (number
of failed sending attempts)
Statistics for exported version 8 AS
aggregation UDP packets. Displayed only
when NetStream aggregation is enabled.
Statistics for exported version 8 ToS-source
prefix aggregation packets
command to disable current aggregation mode.
2295