Display Nqa Server Status - H3C MSR 20-20 Command Reference Manual

150

display nqa server status

Syntax
View
Parameter
Description
Example
NQA S
C
OMMANDS
n
You only need to configure the NQA server for UDP-jitter, TCP, and UDP-echo
tests.
display nqa server status
Any view
None
Use the
display nqa server status
# Display NQA server status.
<Sysname> display nqa server status
nqa server is: enabled
tcp-connect:
IP Address
2.2.2.2
udp-echo:
IP Address
3.3.3.3
Table 602 Description on the fields of the display nqa server status command
Field
tcp-connect
udp-echo
IP Address
Port
C
ERVER ONFIGURATION
command to display NQA server status.
Port
2000
Port
3000
Status
active
Status
inactive
Description
NQA server status in the NQA TCP test
NQA server status in the NQA UDP test
IP address specified for the TCP/UDP listening
service on the NQA server
Port number of the TCP/UDP listening service
on the NQA server